carriage extension for trailer

hi, very interested in this idea - good luck - take piccies :)- how do people transport their carriages and little ponies with one trailer ? interested in how the set-up works? as I have a trailer, some 10-2's and a carriage but only one towing vehicle.
 
I have just had my Ifor 505 extended to take my 4 wheel carriage, by Bob Maddams of Centaur Engineering, nr Wisbech. I am really pleased with it, and it is so much easier to reverse now it is longer! The carriage fits on sideways and has ramps which are user friendly to load/unload the carriage. And the front load on the Ifor still has room to be opened with the carriage in place. We have been to Blandings Farm for a training session and back about 200 mile round trip and a good journey was had by all! :D
 
I've seen trailers with brackets welded to the ramps to hold the axle and body of the cart and the shafts strapped up against the top of the ramp. Obviously the brackets would not need to be so big that the ramp couldn't be lowered!

I've also seen someone who took out the original partition, made a new one so the pony travelled herringbone in the front of the trailer and the carriage went in the back of the trailer with the shafts up and over the back ramp.

This was with two-wheelers on both scenarios. I personally prefer the second option, especially as the shafts on my cart are removable. However at present I'm towing with a flatbed transit so the cart would go in the back of there. HTH :)
 
I remember seeing a whole web page full of different ad ons to trailers. Extensiond to the drawbar and stuff.

Maybe google and look at images and see what you can find.
 
I've seen trailers with brackets welded to the ramps to hold the axle and body of the cart and the shafts strapped up against the top of the ramp. Obviously the brackets would not need to be so big that the ramp couldn't be lowered!
:)

We have this for when Suzy take Stella out and about the cart bolts onto the back of the trailer. The fixtures were very small but strong and its only a lightweight trap so never budges no matter how long or windy the journey is.:)

Nikki xxx
 
I've seen trailers with brackets welded to the ramps to hold the axle and body of the cart and the shafts strapped up against the top of the ramp. Obviously the brackets would not need to be so big that the ramp couldn't be lowered!

the extension is for a two wheeled bennington for a 16h horse so i need something substantial.We have some ideas but not sure where to put the shafts.
 
newrider.com