making your own parelli style headcoller..

Hi Anna,
Try to source 100% polyester marine double braid 1/4" or 6mm rope for your halter. nylon rope could be made from anything and Polyethylene or polypropylene do not have the shock absorbancy and low stretch of polyester. also poly blend rope may breakdown quickly with UV exposure.
I did a technical article on halters, it may have some info that will help your making
Go to our website www.lodgeropes.com and click on Halter Tech Article in the menu.

Good luck with it, email if you run into any problems

cheers
Rob
LodgeRopes
 
I used the same site as showjumper, it took me 4 hours because my rope was too thick and wouldnt stay where I put it. (yes it did seem alive)it was too thick to bend properly.

I managed it in the end, then burnt the knots to melt them in place. It went black, so I covered it masking tape. What a mess.

Definately learn the double overhand because the simplier method for that part just keeps moving all the time.

Very frustrating business. Must try again sometime with thinner rope.
 
Aw shucks INHS ( drawing circles in the sand with my big toe)
Guess I better make you something special, give me an email and let me know what you need. All jokes aside, making a halter is not rocket science. But trying to get it right is Bloody hard the first 100 times.... after that it is easy..lol.
Rob
LodgeRopes
 
Aw shucks INHS ( drawing circles in the sand with my big toe)
Guess I better make you something special, give me an email and let me know what you need. All jokes aside, making a halter is not rocket science. But trying to get it right is Bloody hard the first 100 times.... after that it is easy..lol.
Rob
LodgeRopes

you are not kidding there. twice was enough for me. think I will buy them in future.
 
I had a go at it and it actually didn't turn out too bad, too bad I didnt have the proper type of rope
 
Last edited:
I've bought one which was not cheap and complete rubbish, so even if we continue to buy them these links are a great resource for us to have a better understanding of quality and most importantly fit! Muchos gracios to those of you who gave the information and to the OP for starting this thread :D
 
mayoguinness... re splicing a halter insted of tying knots. You dont need any special tools or devices...for the first 10 years I made ropes, I used knitting needles as 'fids', so if you can find a knitting needle (cut off the lumpy end) or something similar that is roughly the same diameter as the halter rope, it is simple to 'sew' one rope thru the other.. Butt the end of the rope against the now square end of the needle and tape in place with scotch tape or similar.

I havent tried it, but i imagine you can follow the instruction posted, just replace the double overhand knots with splices.

Good luck, email me if you need any specific questions.

cheers
Rob
 
All jokes aside, making a halter is not rocket science. But trying to get it right is Bloody hard the first 100 times.... after that it is easy..lol.

LodgeRopes

I think this is the main point! It's not rocket science, but it does take a huge amount of time and PRACTICE to get it right. I tried once, just to see if I could do it. After 2 days, a dictionary full of expletives and several buckets of sweat - I had something that looked like a curiously shaped fishing net. :o:D:D

Anna, if you're looking at making a business out of it, or if you are just fascinated by knots and ropes and love spending hours fiddling with them - fine. However, if, like most people who ask that question, you are actually trying to save money by making a one-off rope halter for yourself - forget it.
Buy one of Rob's, save yourself all the hassle, and spend that time on your horse. Then you know it's good quality, correctly tied and will give you the best communication with your horse.

I'm not sure about the UK prices, but certainly in Austria - to buy the proper quality of the rope alone costs about the same as the finished product from Rob - including the postage from Oz. I imagine it's similar in the UK and therefore any money savings are really minimal if at all. Buy your lead rope locally, though - that's heavy and the postage does make it expensive.
 
Very sensible post from Kate F :D

I love rope and knots and have plenty of time ( okay sounds a bit kinky ) Anyho I am able to tie a rope-halter in 30 minutes including the Fiador knots ... BUT I could NOT make it made-to-measure, it takes a HUGE amount of practise for being able to make-the-halter-fit right.

So yes, if it is a one off, measure your horse, email Rob, et VOILÀ you will have a beautifully made rope-halter that will fit your horse in your choosen colour.

Okay now Rob, can I get a comission ? :p
 
I used the same site as showjumper, it took me 4 hours because my rope was too thick and wouldnt stay where I put it. (yes it did seem alive)it was too thick to bend properly.

I managed it in the end, then burnt the knots to melt them in place. It went black, so I covered it masking tape. What a mess.

Definately learn the double overhand because the simplier method for that part just keeps moving all the time.

Very frustrating business. Must try again sometime with thinner rope.


LMAO XXX :D
 
mayoguinness... re splicing a halter insted of tying knots. You dont need any special tools or devices...for the first 10 years I made ropes, I used knitting needles as 'fids', so if you can find a knitting needle (cut off the lumpy end) or something similar that is roughly the same diameter as the halter rope, it is simple to 'sew' one rope thru the other.. Butt the end of the rope against the now square end of the needle and tape in place with scotch tape or similar.

I havent tried it, but i imagine you can follow the instruction posted, just replace the double overhand knots with splices.

Good luck, email me if you need any specific questions.

cheers
Rob

Ah I see, well I don't think I've got a hope in hell but I'll have a play!
Thanks for the help, apreciate it.
x
 
I made one using the instructions a couple of years ago (still using it too, and it washes up nicely in the washing machine). I went to a chandlers to get the rope.

It took two days, basically tying and untying and fiddling about to get the double overhand knots to work. The instructions I used didn't use a fiador (it was optional but my brain went into meltdown on the instructions for that bit - too many not very clear pictures and not enough words...) and gave instructions for measuring horse and then landmarks on the rope to fit.

When I was done, it didn't fit :D and I had to go home, untie everything and start again. I did have a great feeling of achievement when I finished, though and it has lasted very well (I was able to readjust it quite easily when I got a different sized horse :D).

Eta I would love to learn how to splice by hand, I spend a bloomin fortune on rope reins, I wish I could make my own...

ETA ETA I used the instructions for Medium for my cob mare - it was miles too big. Trial and error, I'm afraid.
 
G'day...
Thank you KateF, Lili, inhs, the cheques are in the mail..seriously, thank you for your support. I personally make every rope item, (oops, except for the braided nosebands India, my 12yo daughter, does on some halters) so there are no excuses, Our company name is only as good as the last halter I made.
BUT....
Many years ago, Sharon attended a Clinic (a what??? that was the usual response in the early days in OZ) and came home with a rope halter. When I found out she paid $20 for it.....I said I can make these, no problem. so i snuck off with the new unused halter and proceeded to pull it apart to work out how it is done. Well several days of work left me with a beautiful 20ft length of rope, not a knot in sight, just chalk marks where knots once were located. I ran out of excuses and finally had to show Sharon what I had done to her brand new unsued halter. It was at this point our relationship changed...lol. Within a week her halter was retied as i found a guy that knew how to make halters but wanted to learn how to splice double braid rope, so i learned how to do class 1 double braid splices and exchanged my new knowledge for the coverted secrets of halter making.
There was no internet then, and these techniques were are guarded secret.

capalldubh.... rope reins, no problems, just google 'samson technologies splices', they have downloads for all types of rope. OR you can always just fold back the rope and stitch with a hand awl, then whip or tape to make neat.

cheers all
 
'samson technologies splices'

Just looked at the instructions for Eye splices and a lot of things suddenly became clear :D Thank you very kindly for that link (although OH is growling as he had to listen to me making the rope halter in front of the TV for two days complete with intermittent cursing and is now expecting even worse for the rope reins :D).
 
newrider.com